A wall of separate machines, a Smith bar here, a cable crossover there, a power cage in the corner, can swallow an entire garage and a small fortune before you have lifted a single rep. The combos below fold a Smith machine, a power cage, a cable crossover, and a pull-up station into one steel frame that often claims less than 18 square feet of floor, so a squat, a lat pulldown, and a heavy bench all come from the same station.
A great combo lives or dies on three things: a frame stout enough to trust over a loaded squat, a cable system that moves smoothly without binding, and a resistance source, plates or stacks, that suits how you train. The picks below serve a beginner kitting out a first garage gym, a strength-focused lifter chasing heavy compounds, a household sharing one station, and anyone replacing three machines with a single footprint. They lead with the best sellers, so the most-bought models come first.
| Combo | Standout features | Price | Link |
|---|---|---|---|
| Goimu S1-V4 (Red, plate-loaded) | 2000 lb frame, 25+ accessories, high-low cable crossover, 17.88 sq ft footprint | Mid-range | |
| Goimu S1-V4 (plate-loaded) | Same 2000 lb S1 cage and crossover, alternate listing and finish | Premium | |
| OPPSDECOR All-in-One | 1400 lb capacity, dual pulleys, LAT pulldown, lifelong warranty | Budget | |
| Major Fitness Drone MAX V | 2500 lb frame, dual 1:1 / 2:1 pulleys, included weight stacks, 18+18 stations | Premium | |
| DONOW Smith Machine | Dual selectorized weight stacks, true independent cables, enclosed steel covers | Premium | |
| JELENS M21 (Black) | 2000 lb frame, independent dual pulleys, front-and-rear partitions, full attachment set | Mid-range | |
| Roygym Power Cage Home Gym | Independent 1:1 dual pulleys, 18.3 sq ft, huge accessory bundle, dip and safety arms | Mid-range | |
| GarveeLife Home Gym | 2200 lb capacity, dual pulleys, quiet PU cables, 15 height positions | Mid-range | |
| Unive Fitness F4 | 2″x2″ 2000 lb frame, dual 1:1 crossover, lifetime support, accessory bundle and bench | Premium | |
| Compact Smith Machine (ExploreHorizon) | 1000 lb capacity, triangular space-saving frame, 10+ stations, full bundle | Budget | |
The price column shows a general tier only. Prices move often, so tap a link for the live figure on Amazon.
How to choose an all-in-one Smith machine combo
These machines look broadly alike in a thumbnail, four steel uprights, a Smith bar, a couple of pulleys, yet the spread in what they can safely hold, how their cables feel, and what arrives in the box is enormous. A few decisions sort the right station from the wrong one well before you check a price.
Frame capacity and steel gauge
Rated capacity is the headline number, and it ranges widely here, from 1000 pounds on the compact ExploreHorizon up to 2500 on the Major Fitness Drone MAX V. That figure matters less for the weight you will personally lift, few home lifters approach four figures, and more as a proxy for how rigid and stable the cage feels under a heavy squat. Look past the sticker to the tubing: 2-inch by 2-inch uprights, as on the Drone MAX V, DONOW, and Unive Fitness, are the stiffest, while 50 mm (roughly 2-inch) tubing on the JELENS, GarveeLife, and ExploreHorizon is the common home-gym standard. More steel means more stability and, usually, more weight to assemble and anchor.
Plate-loaded or weight stacks
This is the biggest split in the group and shapes both your budget and your routine. Plate-loaded combos, the Goimu, OPPSDECOR, JELENS, Roygym, GarveeLife, Unive, and ExploreHorizon, hang Olympic plates on the cables and bar, so they cost less up front but need plates you supply and a few seconds to load and unload. Stack-loaded machines, the Major Fitness Drone MAX V and the DONOW, build in selectorized weight stacks: you move a pin to change resistance instantly, with no plates to buy, store, or rack. Stacks command a premium and arrive far heavier, but for fast supersets and a tidy, commercial feel they are hard to beat. Note that on most of these listings the barbell plates and a bench are sold separately.
Cable system: single, dual, ratio
The crossover is where these combos earn their keep beyond a plain rack. A true dual, independent pulley system, found on the JELENS, Roygym, GarveeLife, DONOW, Unive, and OPPSDECOR, lets each arm move on its own for unilateral work, supersets, or two people training at once. Pulley ratio matters too: a 1:1 ratio delivers true-weight resistance ideal for slow, strength-focused pulls, while the Major Fitness MAX V adds a switchable 2:1 ratio so you can lift heavier with lighter plates on high-volume moves like lat pulldowns. More adjustable pulley positions, the MAX V offers 18 and the Roygym 20, mean cleaner alignment for every height and exercise.
Footprint, height, and ceilings
An all-in-one only saves space if it fits the room. Several makers state their footprint plainly, the Goimu at 17.88 square feet and the Roygym at 18.3, so a single station replaces three machines in a corner. Height is the catch most buyers miss: these frames run roughly 84 to 87 inches tall, and you need clearance above that to use the pull-up bar and overhead pulleys. Measure your ceiling first, especially in a garage or basement, and confirm the cage width clears your bench and walking space.
Attachments, warranty, and assembly
The accessory bundle changes a combo’s real value. The Goimu, JELENS, and Roygym ship with sprawling kits, lat bars, tricep ropes, T-bars, landmines, J-hooks, storage pins, and more, that would cost a fair amount bought separately, while leaner listings expect you to add handles over time. Warranty spans from a 1-year cover (Roygym) to 2 years (Goimu, JELENS) to lifetime after-sales support (Major Fitness, OPPSDECOR, Unive). Finally, plan for assembly: most ship in two or three heavy boxes that can arrive on different days, and nearly every maker recommends a second pair of hands and a free afternoon.
Goimu S1-V4 Smith Machine, 2000LBS Power Cage (Red, Plate-Loaded)
The best seller in this group earns the spot by packing a near-commercial station into one frame at a mid-range price. The Goimu S1-V4 fuses a Smith machine, a power cage, and a functional trainer, with the heavy-duty steel frame rated to 2000 pounds and the linear-bearing Smith bar to 1000, across 10 selectable heights with twin hook protection. The high-low cable crossover runs on a slide-rail design with stainless-steel composite parts for smooth, consistent resistance at low, mid, or high angles, and the kit lands with over 25 accessories, a tricep rope, T-bar, pull-down bar, counterweight racks with clamps, and a 360-degree landmine. All of it occupies just 17.88 square feet, so it suits an apartment, garage, or compact home gym without taking the whole room.
Pros
- 2000 lb frame and 1000 lb Smith bar for confident heavy lifts
- Smith, power cage, and cable trainer combined in one unit
- 25+ accessories included, from tricep rope to 360-degree landmine
- High-low slide-rail crossover for low, mid, and high angles
- Compact 17.88 sq ft footprint plus a 2-year warranty
Cons
- Plate-loaded; weight plates and a bench are not included
- Ships in 3 boxes and needs a substantial assembly session
- Tall frame demands real ceiling clearance for the pull-up bar
Best for: a do-everything first home gym that wants commercial-style versatility and a full accessory kit at a fair price.
Mid-range tier. Check price on Amazon
Goimu S1-V4 Smith Machine, 2000LBS Power Cage (Alternate Listing)
This is the same S1-V4 platform as the pick above, the identical 2000-pound heavy-duty steel cage with its cable crossover system, listed separately and shown in a different finish. The core build is unchanged: 59.84 inches long by 46.85 wide by 84.25 tall, 21 one-inch holes for accessory placement, and the same all-in-one blend of Smith machine, power cage, and functional trainer aimed at squats, bench presses, deadlifts, lat pulldowns, and crossovers. Because it shares the S1 engineering, it inherits the same strengths, a stable frame and a versatile slide-rail crossover, and the same caveat that you supply your own plates. If the primary listing is out of stock or this configuration is priced better when you look, it is the equivalent machine under a different ASIN.
Pros
- Same proven 2000 lb S1 cage and crossover system
- Generous 59.84 by 46.85 by 84.25 inch training footprint
- 21 one-inch holes for flexible accessory positioning
- Covers squats, presses, deadlifts, pulldowns, and crossovers
- A useful fallback if the main listing is unavailable
Cons
- Listed at a premium versus the primary S1 listing
- Plate-loaded; plates and bench sold separately
- Same multi-box shipment and full assembly required
Best for: buyers who want the S1-V4 in this finish, or as a backup when the lead listing is sold out.
Premium tier. Check price on Amazon
OPPSDECOR All-in-One Adjustable Smith Machine with LAT Pulldown
The OPPSDECOR is the budget gateway into this category, bundling a Smith machine, power cage, cable crossover, pull-up station, cable station, and squat rack into one frame at the lowest price here. It runs a dual-pulley mechanism for two-sided cable work, a fixed-track Smith system for stability through deep squats, and precision-bearing pulleys on electroplated telescopic poles for smooth pulldowns; the steel cable rope is rated to 300 pounds and the cage to 1400. Built-in storage rods keep plates off the floor, and the standout reassurance is the support: a lifelong warranty, replies within 24 hours, and free replacements for four years. The trade is a lower weight ceiling than the heavy hitters and the usual note that plates and a bench are not in the box.
Pros
- Lowest entry price for a full six-in-one station
- Dual-pulley cable system with smooth bearing pulleys
- Fixed-track Smith for stable deep squats
- Built-in storage rods keep plates organized
- Lifelong warranty and 4 years of free replacements
Cons
- 1400 lb cage and 300 lb cable rating trail the heavy frames
- Plates and weight bench not included
- Ships in 2 boxes that may arrive on different days
Best for: a first home gym on a tight budget that still wants a real cable crossover and Smith bar.
Budget tier. Check price on Amazon
Major Fitness Drone MAX V Smith Machine with Weight Stacks
The Drone MAX V is the most capable station here and the one that feels closest to a commercial machine. It combines a power rack, Smith machine, lat pulldown, low-row station, and multi-grip pull-up bar in a 2″x2″ 14-gauge steel frame rated to 2500 pounds, the highest in this group, with the Smith bar handling 400 pounds dynamic and 750 static. Its signature is the dual-ratio aluminum pulley system: a 1:1 setting for true-weight strength work and a 2:1 setting to move heavier loads with lighter plates on high-volume pulls. With 18 J-cup positions, 18 pulley positions, included weight stacks for instant pin-changes, and lifetime after-sales support, it is built for a lifter who wants commercial behavior at home and is ready to pay and assemble for it.
Pros
- Highest 2500 lb capacity on a stiff 2″x2″ 14-gauge frame
- Switchable 1:1 and 2:1 pulley ratios for strength or volume
- Included weight stacks adjust instantly with a pin
- 18 J-cup and 18 pulley positions for precise form
- Lifetime after-sales support and 24/7 help line
Cons
- Top-of-range premium price
- Weight-stack build is very heavy to ship and assemble
- Tall frame needs ample ceiling height to use fully
Best for: a serious lifter who wants commercial-grade capacity, weight stacks, and dual pulley ratios in one home station.
Premium tier. Check price on Amazon
DONOW Smith Machine with Weight Stacks and Dual Cable Crossover
The DONOW is the other weight-stack machine here, and it makes the cleanest case for selectorized resistance. Two massive stacks feed a true dual, independent cable crossover, so lat pulldowns, rows, and crosses change weight with a pin instead of a trip around the rack to swap plates, and each side moves independently for isolation and varied movement patterns. The stacks sit inside durable steel covers, which keeps cables and weights contained for a neat, safe look that exposed plate-loaded designs cannot match, a real plus in a shared or family space. A solid Smith section on smooth linear bearings and a 2″x2″ steel frame round out a station engineered to mimic commercial equipment without the plate clutter.
Pros
- Dual selectorized weight stacks for instant pin changes
- True independent dual cables for isolation and varied patterns
- Enclosed steel covers keep weights tidy and contained
- Smith section on smooth linear bearings for stable lifts
- Sturdy 2″x2″ steel frame for commercial-style feel
Cons
- Premium price for the dual-stack design
- Very heavy unit to move and assemble
- Stated stack weight may cap the heaviest cable pulls
Best for: a tidy, plate-free station where fast pin-changes and a clean enclosed look matter most.
Premium tier. Check price on Amazon
JELENS M21 Smith Machine with Dual Pulley Cable Crossover (Black)
The JELENS M21 is the pick built for more than one person at a time. Its independent pulley systems run on both sides while front-and-rear partitions let two people square up to the cage at once, so a household or a pair of training partners can share a single station without waiting. The frame uses 50 mm by 50 mm heavy-duty steel rated to 2000 pounds, with 20 laser-marked height positions for quick, repeatable setup, and the Smith module welds its 9 adjustable columns with screws rather than relying on direct-insert pins, paired with linear bearings and a bottom spring shock-absorption system. The accessory haul is generous, lat bar, T-bar, pull-down bar, tricep rope, J-hooks, cable handles, storage pins, and a 360-degree landmine, and upgraded steel-shaft pulleys keep the cables quiet.
Pros
- Independent dual pulleys plus partitions for two users at once
- 2000 lb 50 mm steel frame with 20 laser-marked heights
- Welded 9-column Smith module with spring shock absorption
- Large accessory bundle including landmine and tricep rope
- Upgraded steel-shaft pulleys for quiet, smooth cables
Cons
- Plate-loaded; plates and bench not included
- Ships in 3 boxes and is a multi-hour build
- Two-user width needs more clear floor space
Best for: households or training partners who want two people working the cage and cables simultaneously.
Mid-range tier. Check price on Amazon
Roygym Power Cage Home Gym with Dual Pulley Cable Crossover
The Roygym leans hardest into accessory value, arriving with one of the longest attachment lists in the group, a Smith bar, 360-degree landmine, battle-rope anchor, pull-up bar, lat bar, T-bar handle, straight bar, tricep rope, cable handles, dip bars, safety arms, J-hooks, band pegs, foot board, and more. The Smith bar glides on premium linear bearings across 9 height positions with built-in safety stops, and the independent dual pulleys run a 1:1 ratio across 20 adjustable positions for unilateral work, supersets, and partner training. It all fits in 18.3 square feet, so it replaces a rack, crossover, and pull-up station in a single corner. The warranty is the shortest here at one year, but the sheer breadth of included kit makes it a strong everyday all-rounder.
Pros
- Exceptionally complete accessory bundle, including dip and safety arms
- Independent 1:1 dual pulleys with 20 positions
- Linear-bearing Smith bar, 9 heights, with safety stops
- Compact 18.3 sq ft footprint for tight rooms
- 24-hour support for setup guidance
Cons
- 1-year warranty is the shortest in this group
- Plate-loaded; plates and bench sold separately
- Ships in 3 packages that may arrive on different days
Best for: a lifter who wants the widest set of attachments out of the box in a small footprint.
Mid-range tier. Check price on Amazon
GarveeLife Smith Machine Home Gym, 2200 LBS with LAT Pulldown
The GarveeLife strikes a middle ground: a high 2200-pound capacity and quiet-running cables at a mid-range price. It bundles a squat rack, power cage, Smith machine, cable station, and pull-up station, with dual pulley systems so two people can train together, and runs PU cables on a PU pulley over solid steel rails with a linear bearing for notably quiet operation, a genuine asset in a shared house or apartment. The frame is built from 50 mm by 50 mm steel tubing with 12 connecting triangle gussets for added rigidity, measures 87.2 inches tall by 70.9 long by 48 wide, and offers 15 height positions for flys, lat pulldowns, curls, rows, and more. Four band pegs extend the resistance options, and the maker sensibly recommends a helper for assembly.
Pros
- High 2200 lb capacity for a mid-range station
- Quiet PU cables and pulley on a linear-bearing system
- Dual pulleys allow two people to train together
- 50 mm steel frame braced by 12 triangle gussets
- 15 height positions plus band pegs for versatility
Cons
- Plate-loaded; plates and bench not included
- Wide 70.9 inch frame needs generous floor space
- Assembly is involved and benefits from a second person
Best for: shared homes that prize quiet cables and a high capacity without paying premium-tier prices.
Mid-range tier. Check price on Amazon
Unive Fitness F4 Smith Machine Power Cage with Dual Cable Crossover
The Unive Fitness F4 pairs commercial-grade 2-inch by 2-inch steel uprights with a notably complete starter kit. The frame is rated to 2000 pounds, its universal layout accepts most standard home-gym accessories, and it combines a power cage, cable crossover, pull-up station, cable station, and squat rack in one compact unit. The cable system uses a smooth 1:1 pulley ratio tuned for slow, strength-focused movements like heavy lat pulldowns and seated rows. What sets this listing apart is what comes with it: dip handles, T-bar, barbell pad, tricep rope, ankle straps, wrist wraps, a weightlifting belt, a lat pulldown bar, and, per the listing, a weight bench, plus lifetime after-sales service. For a buyer who wants the rack, the cables, and the small gear sorted in one order, it is a tidy package.
Pros
- Commercial 2″x2″ steel uprights rated to 2000 lb
- Universal frame accepts most standard accessories
- Smooth 1:1 cables suited to heavy strength pulls
- Generous extras including belt, wraps, straps, and a bench
- Lifetime after-sales service and 24/7 support
Cons
- Premium tier pricing
- Plate-loaded; barbell plates still supplied by you
- Heavy 2″x2″ frame is a substantial build
Best for: a strength-focused buyer who wants stiff commercial-gauge steel and the small accessories handled in one box.
Premium tier. Check price on Amazon
Compact Smith Machine Home Gym, 1000LB Capacity (Small Spaces)
The ExploreHorizon Compact is the space-first pick, engineered for garages, apartments, and rooms where every square foot counts. Its efficient triangular frame and vertical plate storage keep the area clear while still cramming in 10-plus functions: a Smith machine, power squat rack, barbell bar, LAT pulldown station, cable crossover, landmine, and pull-up bar. The 50 mm by 50 mm steel build with solid dual rails carries up to 1000 pounds, the lowest ceiling here but ample for most home routines, and safety spotter arms with J-hooks let you squat and bench solo with confidence. A 7-strand steel cable and PU-coated pulleys keep LAT pulldowns, rows, pushdowns, and curls quiet and fluid, and it arrives with a barbell, landmine, LAT bar, handles, footboard, and storage pegs for a near-complete start.
Pros
- Space-saving triangular frame with vertical plate storage
- 10+ functions including landmine and cable crossover
- Safety spotter arms and J-hooks for solo lifting
- Quiet 7-strand cable with PU-coated pulleys
- Barbell and attachment bundle included to start fast
Cons
- 1000 lb capacity is the lowest in this group
- Plates and a bench are not included
- Compact frame suits moderate, not maximal, loading
Best for: tight garages and apartments that need a full-function station squeezed into the smallest possible footprint.
Budget tier. Check price on Amazon
The verdict
Best overall
The Goimu S1-V4 (Red) takes the top spot. It is the best seller here, and the reason is balance: a 2000-pound frame and 1000-pound linear-bearing Smith bar, a smooth high-low slide-rail crossover, and an unusually deep accessory kit of 25-plus pieces, all in a 17.88 square foot footprint at a mid-range price. It asks you to supply plates and set aside an afternoon to build it, like most plate-loaded combos, but for the most capability per dollar and per square foot, nothing else here matches it. Check price on Amazon
Best value
The OPPSDECOR All-in-One wins on value. It packs a Smith machine, power cage, dual-pulley crossover, pull-up station, and squat rack into the lowest price in the group, then backs it with a lifelong warranty, 24-hour replies, and four years of free replacements, reassurance that usually costs far more. Its 1400-pound cage and 300-pound cable rating sit below the heavy frames, so dedicated max-strength lifters will look higher, but for a complete first station at the smallest spend it is the clear pick. Check price on Amazon
Best premium
The Major Fitness Drone MAX V is the premium choice. Its 2500-pound 2″x2″ frame is the stiffest here, the included weight stacks change with a pin instead of a plate swap, and the switchable 1:1 and 2:1 pulley ratios let you train true-weight strength or high-volume pulls from the same station, all under lifetime after-sales support. It is heavy to ship and build and priced to match, but for a home setup that behaves like commercial equipment it leads the field. For a plate-free alternative with a tidier enclosed look, the dual-stack DONOW is the standout runner-up. Check price on Amazon
Frequently asked questions
Do these all-in-one machines include weight plates or a bench?
Usually not. Most listings here, the Goimu, OPPSDECOR, JELENS, Roygym, GarveeLife, and ExploreHorizon among them, are plate-loaded and state plainly that barbell plates and a weight bench are sold separately, so budget for Olympic plates and a bench on top of the machine. The two stack-loaded models, the Major Fitness Drone MAX V and the DONOW, build the resistance in as selectorized weight stacks, so you do not buy plates for the cables; you may still want a bench. Always read the specific listing before ordering.
Plate-loaded or weight stacks: which is better for a home gym?
It comes down to budget, speed, and tidiness. Plate-loaded combos cost less up front and let you scale weight as high as your plates go, but you load and unload by hand and store the plates somewhere. Weight-stack machines like the Drone MAX V and DONOW change resistance instantly with a pin, feel the most like a commercial gym, and keep the floor clear, though they cost more and ship far heavier. Pick plates to save money and add load cheaply; pick stacks for speed, convenience, and a clean look.
How much space and ceiling height do I really need?
Plan for both floor and overhead clearance. Several makers cite a footprint near 18 square feet, the Goimu at 17.88 and the Roygym at 18.3, but the frames stand roughly 84 to 87 inches tall, so you need extra room above that to use the pull-up bar and overhead pulleys. Measure your ceiling first, especially in a garage or basement, then confirm the cage width clears your bench, your walking space, and any door swing. A compact triangular model like the ExploreHorizon helps where space is tightest.
Can two people train on these at the same time?
On several, yes. Machines with true independent dual pulleys, the JELENS, Roygym, GarveeLife, DONOW, OPPSDECOR, and Unive, let each cable arm move on its own, and the JELENS adds front-and-rear partitions so two people can work the cage and cables at once. That makes them well suited to households or training partners. Just allow more clear floor space around the frame, since two people need room to move without crossing paths.
Are these hard to assemble?
They take real effort. Most ship in two or three heavy boxes that can arrive on different days, and nearly every maker recommends a second pair of hands plus basic tools and a free afternoon. The instructions and, in some cases, an installation video walk you through it, but expect a multi-hour build for the larger frames. Once assembled, anchor and level the unit per the manual before loading it heavily.
This article may contain affiliate links; see our Affiliate Disclosure.