Four kits here advertise between 50 and 61 pieces and not one of them lists what those pieces are. Two kits advertise 20 or fewer and both itemize every item in the box. Count the real one: it says 20-in-1 and its list adds to exactly 20. Then notice what is in that 20. Four adhesive pads, two screws, a wrench and a cable tie. Eight of the twenty are not mounts at all, and that is the kit being straight with you.
At a glance
How to choose
The piece count includes the screws
One kit here proves it. It advertises 20-in-1 and then lists all twenty, and the arithmetic is exact. Read what made the twenty: four adhesive pads, two screws, a wrench and a safety tie, which is eight items that mount nothing. Now apply that ratio to a kit claiming 61 and refusing to list them, and you can see why they will not. Every one of these numbers counts consumables, fasteners and tools alongside the mounts, and the only kits letting you check are the ones with small numbers.
Sixty-one is not one more than sixty
Two brands on this page claim 60 and one claims 61, and none of the three names an item. That single-digit precision is doing something interesting: it makes the number look counted rather than chosen. If it were counted, listing it would cost nothing. Two other kits with far smaller claims itemize everything they contain, and one of them does not make an in-one claim at all and still tells you it has four flat mounts, four curved mounts and four thumbscrews.
Only one kit publishes a measurement
Handlebar mounts fit some handlebars. One listing here says its mount takes bars from 0.75 to 1.4 inches and tilts through 180 degrees, which is a number you can take to your bike. Two others say the mount fits your handlebar regardless of size, and no matter what size your handlebar is, which are the same claim written twice and are not true of anything. Road bars, motorbike bars and fat mountain bike bars span a wider range than any single clamp covers. The kit that gave you a range is the one telling you where its limits are.
Selfie sticks have a length, and one listing gives it
Five of these include a selfie stick or extension pole. One says it extends from 7 to 29 inches. The others say adjustable, fully adjustable, lightweight and popular. Seven inches is a grip and 29 is a proper reach over a crowd or down to a wheel, and the difference between the two ends is the entire point of the object. Where a listing gives you a range, someone measured a product. Where it says adjustable, someone wrote a word.
A sixty-piece kit’s real problem is storage
The moment you own sixty small black plastic parts, the question stops being how many and becomes where are they. Exactly one kit here answers it, with a case using foam pre-cut into slots so each piece has a home and you can see at a glance what is missing. Every other kit on this page arrives in a bag or a box and ends up in a drawer, where sixty pieces become five you can find.
The float is yellow for a reason
Two listings explain that their floating hand grip is bright yellow so you can find it when it is bobbing away from you in the water. That is a real design decision explained rather than a color choice, and it is the sort of detail that only comes from someone having lost one. A third kit capitalizes a warning that its floating set must only be used in water sports, which reads like a company tired of processing returns.
Check the camera list, not the brand names
These kits mount cameras by their standard fork-and-thumbscrew fitting, so most fit most. The differences hide in the newest bodies and the odd shapes. The most detailed compatibility list here belongs to one of the cheapest kits and runs through every GoPro generation by number, five Insta360 bodies, five DJI Action models and two DJI Pocket bodies. The most expensive kit leads its title with its own brand’s cameras and mentions the rest afterwards, which is clear about who it was built for.
KUANVE

The cheapest kit here and the only one that declines to play the numbers game while still telling you exactly what is in the box: four flat mounts and four curved mounts with pads for each, a quick release buckle, a J-hook, four pivot arms, two screw adapters, a tripod adapter, an extension, a wrench, a tether and four thumbscrews. Count them and it is 24 items with no in-one claim anywhere. It is also the only kit on this page naming its materials, as ABS plastic and stainless steel. No straps, no stick, no float; this is the adapter half of the problem.
Pros:
- Itemizes every piece; makes no in-one claim at all
- The only kit naming its materials: ABS and stainless steel
- Eight mounts with pads, four pivot arms, four thumbscrews
- The lowest price here
Cons:
- No straps, selfie stick, float or tripod
- No handlebar mount or suction cup
- No case; 24 loose parts
Best for: spares and adapters, itemized and cheap.
Universal 20-in-1

It says 20-in-1, lists twenty items, and the twenty add up. On a page where four kits claim three times as many and name none of them, that arithmetic is the whole recommendation. It is also real about what makes twenty: four adhesive pads, two screws, a wrench and a tie are in there, and knowing that is exactly the point. Its camera compatibility list is the most specific here, walking through every GoPro generation, five Insta360 bodies, five DJI Action models and the Pocket range by number.
Pros:
- Says 20, lists 20, and the count is exact
- The most specific camera compatibility list on this page
- J-hook, quick release, tripod adapter, two rotating arms
- Flat and curved mounts with pads for each; wrench and tether
Cons:
- Eight of the twenty are pads, screws, a wrench and a tie
- No straps, stick, float or handlebar mount
- No case
Best for: the only piece count on this page you can check.
Luxebell 14-in-1

The smallest number on this page, and it covers the things people actually use: chest strap, head strap, wrist strap, floating grip, selfie stick, suction cup and a flexible tripod. It explains its float is bright yellow so it can be found in the water, which is a reason rather than a color. Fourteen genuinely useful items beats sixty unspecified ones in a drawer, and this is the cheapest kit here with straps in it. It publishes no dimensions and no full parts list.
Pros:
- Chest, head and wrist straps plus float, stick, cup and tripod
- The cheapest kit here that includes straps
- Explains why the float is yellow
- A small number, and the items are the ones you use
Cons:
- No itemized parts list despite the small count
- No dimensions for the stick or handlebar mount
- No case; no spare mounts or pads
Best for: the useful fourteen, without the drawer full.
Appolab 61-in-1

Sixty-one pieces, and its five bullets name about a dozen of them: chest harness, floating grip, selfie stick, tripod adapter, suction cup, J-hook, handlebar mount, three-way pivot arm. The other forty-nine are yours to discover. It does one thing nobody else does, capitalizing a note that the floating set must only be used in water sports, which is a returns-driven sentence and still more information than the piece count carries. Its handlebar mount fits no matter what size your handlebar is, which cannot be true.
Pros:
- Chest harness with adjustable direction and angle
- Floating grip, selfie stick, suction cup, handlebar mount, pivot arm
- Warns that the floating set is for water only
- Cheaper than two rivals claiming fewer pieces
Cons:
- Sixty-one pieces and roughly a dozen named
- Claims its handlebar mount fits any size handlebar
- No dimensions of any kind; no case
Best for: a big bundle, if the number is what you wanted.
NEEWER 50-in-1

The only kit on this page that publishes a measurement, and it is the right one: the handlebar mount fits bars from 0.75 to 1.4 inches and tilts through 180 degrees. Take a caliper to your bike and you know before ordering, which two rivals claiming to fit any handlebar cannot offer you. It also covers the full strap set including a helmet strap, a 360-degree rotating wrist mount, a floating grip, a flexible tripod and a suction cup. Fifty pieces, unlisted.
Pros:
- The only published measurement here: handlebars 0.75 to 1.4 inches
- 180 degrees of tilt on the handlebar mount
- Head, chest and helmet straps; the only helmet strap here
- 360-degree wrist mount, float, flexible tripod and suction cup
Cons:
- Fifty pieces and no item list
- No selfie stick length published
- No case
Best for: knowing the handlebar mount fits your bars.
60-in-1 Kit

The only listing here that tells you how long its selfie stick actually is: 7 to 29 inches, which is the difference between a grip and a real reach, and it is the sort of figure four rivals decided you did not need. Around it, the usual: 360-degree wrist strap, head and chest straps, flexible tripod, floating handle, car suction cup, handlebar mount. It also claims the handlebar mount fits regardless of size, which sits awkwardly next to a rival’s fair 0.75 to 1.4 inch range.
Pros:
- Publishes its selfie stick range: 7 to 29 inches
- 360-degree wrist strap plus head and chest straps
- Flexible tripod, float, suction cup and handlebar mount
- Wrist strap keeps the monopod secure
Cons:
- Sixty pieces, none of them itemized
- Claims its handlebar mount fits regardless of size
- No case; the second-highest price here
Best for: the only selfie stick here with a stated length.
AKASO 60-in-1

It is the only kit here that solves the problem sixty pieces create. The case uses foam pre-cut into slots, so every part has a home, you can see what is missing at a glance, and the camera travels with them. That is worth more than any individual mount on this page. It adds a backpack clip that rotates 360 degrees and comes off a strap or a hat in a second, a yellow float explained as yellow so you can find it, a removable suction cup and the full strap set. It is AKASO’s kit for AKASO cameras first, and it says so in the title.
Pros:
- The only case here, with pre-cut foam slots for each piece
- Backpack and hat clip with 360-degree rotation
- Explains why the float is yellow
- Full strap set; removable suction cup; wide camera support
Cons:
- Sixty pieces, none of them itemized
- The highest price here
- Built for its own brand’s cameras first
- No dimensions for any mount
Best for: sixty pieces you can still find next year.
The verdict
The number on the front counts screws, pads, a wrench and a cable tie, and the only kits that let you verify that are the ones with the smallest numbers. Once you stop reading the count, three real specifications appear on this whole page: one handlebar range, one selfie stick length, and one case with foam in it.
Best overall: Universal 20-in-1. It is the only kit here whose piece count survives being checked: it says twenty, lists twenty, and they add up exactly. It also volunteers that four pads, two screws, a wrench and a tie are among the twenty, which is the fact that makes every 60-in-1 on this page readable. Add the most specific camera compatibility list here, running through GoPro generations, Insta360 bodies and DJI Action models by number, and you have the cheapest kit on this page that takes you as someone who can count.
Best value: KUANVE. The cheapest thing here, and the only one that skips the in-one claim entirely and simply tells you what is in the box: eight mounts with pads, four pivot arms, a quick release, a J-hook, two screw adapters, a tripod adapter, a wrench, a tether and four thumbscrews. It is also the only kit naming its materials. Buy it knowing it is the adapter half of the problem, with no straps, no stick and no float, which it never pretends otherwise about.
Best premium: AKASO 60-in-1. Buy it for the case. Sixty small black plastic parts in a drawer is five parts you can find, and this is the only kit here shipping foam cut into slots so each piece has a place and the gaps are visible. It also explains why its float is yellow, which is a small sign somebody used one. It will not itemize its sixty either, and it was built for its own brand’s cameras first.
FAQ
Is a 60-in-1 kit better than a 20-in-1?
Not necessarily, and you cannot tell. The only kit here that itemizes its twenty shows that eight of them are pads, screws, a wrench and a tie. The kits claiming 60 and 61 name none of theirs.
Will the handlebar mount fit my bike?
Measure the bar. One kit here says 0.75 to 1.4 inches, which you can check. Two others say it fits any handlebar regardless of size, which is not true of any single clamp.
How long is the selfie stick?
One listing says 7 to 29 inches. The rest say adjustable. That range is the whole point of the object, and only one seller measured theirs.
Do these fit my camera?
Almost certainly, since they use the standard fork and thumbscrew fitting. The most detailed list here belongs to one of the cheapest kits and names GoPro, Insta360 and DJI bodies by generation.
Do I need the case?
If you buy sixty pieces, yes. One kit here has foam cut into slots so each part has a home and you can see what is missing. Everything else arrives in a bag.
This article may contain affiliate links; see our Affiliate Disclosure.